Digital Alcohol Breath Tester Detector (CA2000)

Product Description

1. Specification:

*Sensor: Highly selective oxide-semiconductor sensor
*Size: 120 x 60 x 25 mm
*Weight: 200 grams
*Housing: Shock resistant, molded plastic
*Response time: 3 sec.
*Warm up time: 20 sec.
*Recovery time(sensor purge): 30 sec.
*Battery life: Over 300 tests
*Battery: 9V alkaline
*External power supply: 12V DC adapter
*Accuracy: +- 0.01% at 0.10% BAC
+- 0.05mg/liter at 0.50mg/liter BRAC
*Detection range: 0.00 ~ 0.40% BAC
0.00 ~ 2.00 mg/liter BRAC
*Calibration: BAC simulator (Model 34C/Guth Laboratory, USA)
*Digital display: Three digits in numeric readout
*CE, FCC...

The Personalized Gurdian Against Drink Driving:

1. Compact, accurate, reliable, smart looking and easy to use.
2. HD-CA-2000 can be taken everywhere you go to help prevent
Drink driving and binge drinking.
3. HD-CA-2000 uses same sophisticated oxide-semiconductor sensor as shown
At right side and its test result is UNAFFECTED by COLA, COFFEE &
SMOKING, which are commonly consumed with alcoholic beverage.

HD-CA-2000 is an unique & highly-sophisticated alcohol analyzer utilizing
The variation of electrical property value of the oxide-semiconductor
When the alcohol substance is detected. And, with the development of
New ceramic material combined with relevant catalyst, it can selectively
Analyze the alcohol concentration to the ppm unit existing in the human breath.

Our laboratory made it in developing the highly-selective semi-conductive
Sensor (HD-CA-2000) reactive to alcohol substance only, which can be
Differentiated from the other semi-conductive sensor products
(which are often affected by the other substances like smokes and
Smells of food). Furthermore, it did improve to the large extent
The standby, response & recovery time which could be crucial in
Measuring gas concentration.

How To Use:

1)Turn on the PWR On/Off switch
- Soon after the power on, CA2000 will start the countdown 200 to 000
On the display window.
- It is a "Warm-up" process to make the sensor and circuit be ready for testing.

2)When you hear beep sound & green lighting is on READY, please blow into for 3
Seconds till you would hear another time of "Beep" sound.

N. B

1. In this stage, if you don't within 30 seconds, it automatically shows OFF display for turn-off
2. In case you drink quite a little (if actual concentration would be below
0.01% BAC/ 0.05mg/L BRAC), it may not be activated. However, it shows
Still 0.00% and you're said to be in safe range.

3)Then, after 3.5 seconds, the test result (BAC or BRAC) will be displayed
By 3 digits for 15 seconds at the same time both READY and WARN lamps are flickering.

N. B

1. If the BAC / BRAC data would be over 0.05% / 0.25 mg/l(default setting)
Respectively, red WARN lamp will be flickering along with "Alarm" sound.
2. The "Alarm" level is adjustable pursuant to the local legal limit.

4)Finally, it shows "OFF" for turn-off.
5)For the successive testing, try again from No. 1 to No. 3